HONDA CB650Z BOBBER BUILD - ONE

So, armed with the manual and some inappropriate B&Q 'mechanics' tools i set to it in my Dad's garage.  This is a tiny red vice next to a soiled copy of Michael Palin's 'Around the World in 80 days' he has on the kitchen style workbench at the back.  I need to take another pic with something next to it as reference because the pic doesn't do it justice.  

I'll let you know if i ever use it.  


It begins...

This one gives you a good idea of the condition that the bike is in.  Brown has given way to black and the rust is that bad in places it comes away in your hand.  I'm not too bothered as the majority of the mounts are to be done away with.  I want the bike to look ratty, mainly to cover up how shoddy i anticipate my workmanship to be.

Here's the view of the garage and the bike after i did the easy stuff like remove the tank and seat.  My main goal for the day was the get the carbs off as the RAC bloke had said they needed to be cleaned because the choke was sticking.

People who know whats up will know immediately how much of a pain in the arse this is but i jumped in with wild abandon leaving the manual where it belonged, unopened on the black and decker work bench.  This picture shows a big mess (yes, i know the pipes are off at this point but i'll get to them) but reflects how annoying it was that no matter how much i ragged on the air box housing it would not budge.

After much effing and jeffing i sat down and opened it and read that you pretty much have to remove the arse end because the air box housing is moulded plastic forming part of the rear fender.  First i had to remove the back wheel which involved the loosening this shithouse of a rusty bolt: 

Now remember, i bought the all-in-one B&Q 'mechanics' tool set (with box) for about fifty quid which did not include the tool needed to get it off.  I tried a few times with the adjustable spanner which did a good job of almost making it round instead of hexagonal which was handy.  So i stopped that quite quickly.  Then after about an hour of wondering what to do i remember the bike came with a tool bag so i opened it up and what was in there?  This little ripper! 

It came off with ease so managed to not fuck the bolt up and make some progress.  It was one of those situations where someone can give you advice till their blue in the face but you'll go ahead and make the mistake they warned you about because you have to figure it out for yourself.

A quick consultation of the manual again and i removed the rear shocks.  Connoisseurs will notice the can of WD-40 of which i got through about 3 cans up this point because pretty much every bolt on the bike had been welded on by rust. 

This is me taking a picture of myself with the air box that took almost an entire day to remove.

And the guts.

Here are the carbs completely removed.  They are completely filthy so not only will i have to clean the insides but i'll have to break them down and clean the outsides too.  The choke sides butterfly valves(?) on the right were stuck solid so that explains why it wouldn't run.  I think this is a bit out of my skill level so i'll take them to a few motorcycle mechanics for a second opinion before starting the clean.

This ends the first stage, next time: oil chicken shashlik.

Playlist: